Origin |
China |
Brand Name |
JUCHE |
Scope of appliance
JCGCK type low voltage draw-out switchgear is suitable for such electric power system as power plant ,electric substation and industrial and mining enterprises and high buildings, whose rated service voltage is 380V, and also with AC three-phase four-wire system or TN-S. It's function is power receiving, feed, compensation of watless power, and calculating the electric energy, lighting, and the centralized control of motors.
The product is in accord with such standard as GB7251, JB/T9661<LV draw-out switchgear>, IEC62439.1 .
Service condition
1. Altitude:≤2000m
2. Temperature of the enviroment竊�5��/span>~+40��/span>竊�aily average temperature: ≤35��/span>.
3. Relative humidity: When the temperature is +40��/span>, it is not higher than 50%; the lower temperature, the bigger relative humidity is allowed. For example, when the enviroment temperature is +40��/span>, it is 90%.
4. The switchgear shall be installed where there is no violent shake, no impact , no fire, no explorsion and no corrosive danger to the electirc unit.
5. When installing,the angle of inclination is less than 5°,
6. The shipment and storage temperature is -25��/span>+55��/span>, within +70��/span>(less than 24h)
Technical parameter schedule
Rated insulation voltage竊�) 660V, 1000V
Rated service voltage竊�) 380V, 660V
Rated voltage of auxiliary cicuit竊�) AC220V, 380V, DC110V, 220V
Service frequency(Hz) 50~60
Rated current(A) horizontal generatrix ≤3500
vertical generatrix 630, 800,1200
Rated short-time withstand current of generatrix(kA/1s) 50, 80
Neutral generatrix 30
Rated PK value withstand current (kA/0.1s) 105, 50
Breaking capacity of function unit(drawer)(kA) 50(available)
Protection rank IP30,IP40
The generatrix three-phase four-wire system
TN-S
Operation way on the spot, remote, automatically
Measurement
1. Power receiving switch carbinet and bus tie cabinet
Width: 600,800,1000,(800+400)mm
Depth: 800, 1000mm Height: 1800mm
2.Feeding switch carbinet
Width: 600,800mm
Depth: 800, 1000mm Height: 1800mm
3.Motor control carbinet(MMC)
Width: 600,600+200mm
Depth: 800, 1000mm Height: 1800mm
4.Power factor compensation cabinet
Width: 600,(4,6 paths), 800(8path), 1000(10path)mm
Depth: 800, 1000mm Height: 1800mm
|